If it only works for up to 4 skulls, I may need to buy another set of everything for 2 more skulls then right? I wanted to make 6 skulls.
I decided to put 4 in the prison cells and 2 in the cemetery.
You know, after Halloween (or before for the anxious) we are going to have to make a thread for folks to show off their numbskulls.
ok dionica i know you have 6 skulls so you will need 6 brain stems, 1-controller card will run 6 skull sets but you will need 2 power supplies for 1 card.see muy numbskull tutorial. that the Captain and I wrote.
I Hope this answered your questions. Hugs Blinky
__________________
Numbskull tutorial
Great green gobs of greasy, grimy gopher guts,
Mutilated monkey meat
Hey I read through that how to and I don't remember seeing any brain stems.
Well time to get the shovel and hit the cemetery.
for lack of a better term of what to call it, its the rod and everything you need to hook the servos too ,lol To make the Numbskulls* move. We have brain stems why can't Numbskulls*?
But come to think if it, I guess the servos would be the brains and the rod and stuff would be the spinal colum lol
I tried I let you guys figure out what to call it. Hugs Blinky
__________________
Numbskull tutorial
Great green gobs of greasy, grimy gopher guts,
Mutilated monkey meat
I'm getting the kit from Joel with the 2-56 linkage minus the skull plates. Whatever that doesn't have, I need.
ok well you will need for each skull :
1-hardware pack, 4- servos,1- skull plate, 1 controller card will run all 6 skulls but you will need 2 wallwarts. 1- 256 rod to make links and 8 --256 connector ends to make the links. if you are putting it on a bucky body you will need a reducer. If you are putting it on a PVC body you will need 1 end cap and 1 - straight PVC connector, 1- "L" bracket to hook the skull plate to.. Hope this has helped Hugs Blinky
oh and one brain stem weather its Gym Ghosts or mine.
__________________
Numbskull tutorial
Great green gobs of greasy, grimy gopher guts,
Mutilated monkey meat
ok well you will need for each skull :
1-hardware pack, 4- servos,1- skull plate, 1 controller card will run all 6 skulls but you will need 2 wallwarts. 1- 256 rod to make links and 8 --256 connector ends to make the links. if you are putting it on a bucky body you will need a reducer. If you are putting it on a PVC body you will need 1 end cap and 1 - straight PVC connector, 1- "L" bracket to hook the skull plate to.. Hope this has helped Hugs Blinky
oh and one brain stem weather its Gym Ghosts or mine.
Oh good. Then I need the hardware pack enough for 6 skulls, another wallwart and 2-56 connector ends to make the links.
I think Joel is sending me the 2-56 rods to make links.
I'm using bluckies with PVC frames.
__________________ So many home haunting ideas and yet so little time.
Oh good. Then I need the hardware pack enough for 6 skulls, another wallwart and 2-56 connector ends to make the links.
I think Joel is sending me the 2-56 rods to make links.
I'm using bluckies with PVC frames.
ok then just follow the blue flame skull on my website and order what you need.
I also now have a tutorial on how to mount the skull on a pvc frame on the Numbskull* tutorial website
__________________
Numbskull tutorial
Great green gobs of greasy, grimy gopher guts,
Mutilated monkey meat
ok well you will need for each skull :
1-hardware pack, 4- servos,1- skull plate, 1 controller card will run all 8 skulls but you will need 2 wallwarts. 1- 256 rod to make links and 8 --256 connector ends to make the links. if you are putting it on a bucky body you will need a reducer. If you are putting it on a PVC body you will need 1 end cap and 1 - straight PVC connector, 1- "L" bracket to hook the skull plate to.. Hope this has helped Hugs Blinky
oh and one brain stem weather its Gym Ghosts or mine.
I hope you understand re-read the tutorial or call me.
__________________
Numbskull tutorial
Great green gobs of greasy, grimy gopher guts,
Mutilated monkey meat
Linear Mode
