electric chair wav. - Page 2

zeenon · #11 (**permalink**) 03-07-2007, 11:23 AM

I had a spring laying around that fit perfect inside 1/2" PVC, so I used about a 5" spring between two small sections of PVC. With this setup the whipping movement is really adjustable and when I like the motion I'll install a small bolt. I lost a little motion because I wanted the legs to move also so I ran PVC up each leg so it looks like the prop is kicking.

I have to find some straps for his arms and legs and a cool mask. Lotsa work left to do especially with the lighting and controllers, I want to vary the speed of the motion with a speed controller so he starts slow and has convulsions 2/3 of the way through. I'm also moding the fog controller so I can control it with the Prop-1

Z

zeenon · #12 (**permalink**) 03-13-2007, 04:47 PM

Getting there.... Here are some new pics of the electronics and new mask....

Dusza Beben · #13 (**permalink**) 03-14-2007, 03:02 PM

Quote:

Originally Posted by ArtVan

I am looking for a good electric chair sound files. Working on a electric chair prop.

Thanks
Art

Hey Art, I'd be happy to send you a copy of the electric chair intro i did for zeenon the other day. PM me an addy. I might as well go international!

DB

P.S. Can't wait to see the final product zeenon!

#14 (**permalink**) 03-14-2007, 03:38 PM

Quote:

Originally Posted by zeenon

I had a spring laying around that fit perfect inside 1/2" PVC, so I used about a 5" spring between two small sections of PVC. With this setup the whipping movement is really adjustable and when I like the motion I'll install a small bolt. I lost a little motion because I wanted the legs to move also so I ran PVC up each leg so it looks like the prop is kicking.

I have to find some straps for his arms and legs and a cool mask. Lotsa work left to do especially with the lighting and controllers, I want to vary the speed of the motion with a speed controller so he starts slow and has convulsions 2/3 of the way through. I'm also moding the fog controller so I can control it with the Prop-1

Z

Another great work of Art a blue ribbion winner for sure, hey Z do you want a brain for your props.? I'll send you one? see my avavor for picture it is made of dragon skin, real soft but better then latex, Love Ya.

zeenon · #15 (**permalink**) 03-15-2007, 08:59 AM

What I really need now is some leather strips about 2" wide by 10' for the chest, arms and legs. I can't bring myself to buy a belt and cut it to pieces

.

Or anybody have any ideas for electric chair restraints??

Z

Dusza Beben · #16 (**permalink**) 03-15-2007, 09:39 AM

Most Goodwill stores sell belts for $1 each. I'd go that route.

DB

#17 (**permalink**) 03-15-2007, 10:56 PM

Quote:

Originally Posted by zeenon

What I really need now is some leather strips about 2" wide by 10' for the chest, arms and legs. I can't bring myself to buy a belt and cut it to pieces

.

Or anybody have any ideas for electric chair restraints??

Z

What if you take metal air conditioning ducts the round ones cut them in half
and put a hinge in them, and hasp on the front with a small lock

zeenon · #18 (**permalink**) 03-17-2007, 03:34 PM

Other then the sound clips (2 and 3) and a few minor things I posted a new video (VIDEO2). The second 1:30 are lights on.

Under Electric chair:

http://www.deadmansinne.com

Z

#19 (**permalink**) 03-17-2007, 03:46 PM

Dearest Z; The only thing I can say is , " Make One for me!!!! " That is awsome.
do you have the mouth moving to the sound track I could nt tell? But I love it.

WILLIDEE · #20 (**permalink**) 10-19-2007, 03:45 PM

I would like to know what things did you use for the electric chair to work, it will greatly be appreciated, thanks.