JonnF3, thanks for the picture. I actually understand it Between your picture and the excellent schematic ScareSeeker made, that will be the back-up plan in case I can't afford the DMX version. That $299 Exorcist price tag is crazy. Anyone else have a cheaper trigger alternative and still be able to use DMX?
there is a computer keyboard hack, there might be a how-to on here somewhere on how to do it. but it wouldn't be the same level of control as exorcist.
does any one have a how to on the vsa keyboard hack?
there is a computer keyboard hack, there might be a how-to on here somewhere on how to do it. but it wouldn't be the same level of control as exorcist.
does any one have a how to on the vsa keyboard hack?
that looks like a very good how-to for the keyboard hack. it is pretty tedious but that is the only other way i know of triggering vsa, sadly with that method you also can only trigger one prop or one routine and with exorcist you could have 8 triggers. i am looking at getting one this year also and the cost makes me keep thinking there has to be another way, but i haven't found a cheaper way yet
that looks like a very good how-to for the keyboard hack. it is pretty tedious but that is the only other way i know of triggering vsa, sadly with that method you also can only trigger one prop or one routine and with exorcist you could have 8 triggers. i am looking at getting one this year also and the cost makes me keep thinking there has to be another way, but i haven't found a cheaper way yet
I agree, I'm seeing the one connection as a problem as well. Why bother going with the scalable DMX if I won't go with the scalable triggering mechanism? Looks like I will just have to bite the bullet.
if your going to get the exorcist i would look at the skulltronix support forum and email them with any questions about it as triggering vsa and exorcist is where it gets out of my knowledge, they are very helpful and can tell you the features and limitations of the exorcist when using dmx.
also, before i forget, you will need a dmx terminator at the end of the dmx chain so whatever the last dmx device is ( fog machine or relay pack ) you plug the terminator into it's dmx out port to end the signal chain, this tells the dmx signal that it is the end and helps reduce errors in the signal. here is an inexpensive one from a trusted site Hosa Technology | DMX 3 Pin Terminator | DMT-414 | B&H Photo
Thanks, I will go to the forum there and check it out. By the way, the hubby said it's a "go" for the Exorcist.
I was wondering if I needed to add the terminator. I had seen you mention that before in another thread. Thanks for all the help and I'll keep you posted on the progress. I. can't. wait. to. start. building!
i was just thinking about the dmx relay/dimmer pack. if you go with a dmx dimmer make sure it has a relay mode or program the dimmer so that it is on or off and not in the middle, you don't want to try and dim a solenoid or a fog machine lol have fun with the build, we are all here for any questions you might have.
I am concerned about the postings ive read.....especially by Genexer.....i saw that the DMX and/or exorcist is mentioned to run a monster in a box. It sounds as if the project is going to be more expensive then it has to be. The controller board i used does not require a computer or software, and can be activated by an IR sensor which i also use. If you need any info. on how to wire anything, i have it all, including wiring a relay into a fog machine trigger. I used a Gemmy 110v trigger. I can also provide info. on how to wire a 110v light to the controller board. If you have any questions, dont hesitate to ask. Especially if it saves you some bucks.
Between your picture and the excellent schematic ScareSeeker made, that will be the back-up plan in case I can't afford the DMX version. That $299 Exorcist price tag is crazy. Anyone else have a cheaper trigger alternative and still be able to use DMX?
Linear Mode
